Brilliance
FAB Zirconia 4D ML
Combining a soft shade and translucency gradient in one material. Perfect for restorations with the highest aesthetic demands.
FAB Zirconia 4D ML is an ultra-high translucency multilayer zirconia and the most aesthetic material in the FAB Zirconia range. It features a smooth shade and translucency gradient with outstanding light transmission from the incisal edge to the dentin. With a translucency of 45–49%, this premium material is ideally suited for highly aesthetic monolithic restorations, especially in the anterior region.
Added value
- Maximum aesthetics with full indicative approval
- Strength (incisal–cervical): typical mean value approx. 1100 MPa
- Translucency (incisal–cervical): 45–49 %
- Colour gradient achieved through multilayer
- Coefficient of thermal expansion (CTE): 10×10⁻⁶ K⁻¹
- 16 VITA shades + 3 bleach shades (OM1–OM3)
Recommended use
- Bridges, 16 units
- Crowns
- Inlays, onlays, veneers
- Maryland bridge
Material data
- Density: approx. 6.04 g/cm³
- Flexural strength: typical mean value approx. 1100 MPa
- Vickers hardness: 1250 HV
- Coefficient of thermal expansion (CTE): 10×10⁻⁶ K⁻¹
- Translucency: 45–49 %
FAB Zirconia 4D ML
Flexural strength: Typical average approx. 1100 MPa
Translucency: 45–49%
Color gradient: ja
CTE: (10,5 ± 0,5) ·10-6·K-1
approved indications: all
Colors: 16 Shades and 3 Bleachshades
Heigths (mm): A-Farben: 14, 16, 18, 20, 25 B-,C-,D-Farben: 14, 18, 25
FAB Zirconia ST
Stability: 1050 MPa
Translucency: 45 %
Color gradient: no
CTE: (10,5 ± 0,5) *10-6*K-1
Colors: 16 shades
Blank height: 14, 16, 18, 20 and 25 mm
FAB Zirconia OP
Stability: 1150 MPa
Translucency: 35 %
Color gradient: no
CTE: (10,5 ± 0,5) *10-6*K-1
Colors: OP 0, OP 1, OP 2, OP 3, OP 4
Blank height: 14, 18 and 25 mm
FAB Zirconia 3D ML
Stability (incisal-cervical): typical average approximately 1100 MPa
Translucency (incisal-cervical): 41-49 %
Color gradient: yes
CTE: 10*10-6*K-1
Colors: 16 shades and white
Blank height: A-colour: 14, 16, 18, 20, 25; B-, C-, D-colour: 14, 18, 25
FAB Zirconia ML
Stability: 1050 MPa
Translucency: 45 %
Color gradient: yes
CTE: (10,5 ± 0,5) *10-6*K-1
Colors: 16 shades
Blank height: A-colour: 14, 16, 18, 20, 25; B-, C-, D-colour: 14, 18, 25
FAB Zirconia HT
Stability: 1150 MPa
Translucency: 41 %
Color gradient: no
CTE: (10,5 ± 0,5) *10-6*K-1
Colors: white for the infiltration technique
Blank height: 14, 16, 18, 20 and 25 mm
Brilliance 4D Zirkon
Combining a soft shade and translucency gradient in one material. Perfect for restorations with the highest aesthetic demands.